Click here

CRUISE CONTROL SYSTEM(for Gasoline) Cruise SET Indicator Light Circuit

Click here
Click here
DTC Code DTC Name
  Cruise SET Indicator Light Circuit
Click here

DESCRIPTION

When the ECM detects a cruise control main switch "on" signal from the cruise control main switch, it sends it to the combination meter through CAN communication. Then the cruise control SET indicator light turns on.

Click here

CAUTION / NOTICE / HINT

Note:

First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this problem.

Click here

PROCEDURE


  1. Click here

    PERFORM ACTIVE TEST USING INTELLIGENT TESTER (CRUISE CONTROL SET INDICATOR LIGHT)


    1. Using the intelligent tester, perform the Active Test (Click here).

      Table 1. Combination Meter
      Tester Display Test Part Control Range Diagnostic Note
      Indicat. SET Cruise control SET indicator light OFF/ON -
      OK
      Indicator light turns on/off.

  2. Click here

    READ VALUE USING INTELLIGENT TESTER (CRUISE CONTROL MAIN SWITCH)


    1. Using the intelligent tester, read the Data List (Click here).

      Table 2. Cruise Control
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Cruise Control Cruise control / OFF or ON

      OFF: Cruise control not set

      ON: Cruise control set

      		 -
      OK
      The display is as specified in the normal condition column.

    • OK

      PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)

    • NG

      REPLACE ECM (Click here)