IGNITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING COLUMN ASSEMBLY (for TMC Made LHD)

    Click here

  2. REMOVE STEERING COLUMN ASSEMBLY (for TMC Made RHD)

    Click here

  3. REMOVE IGNITION SWITCH ASSEMBLY (for TMC Made)

    A01VJF8E01

    CAUTION:


    • Perform the operation after situating the upper steering column bracket assembly in such a way that the ignition or starter switch assembly faces upward, as shown in the illustration.


    • Do not turn the upper steering column bracket assembly sideways or downward because doing so might release the upper steering column bracket assembly's component parts.

    Text in Illustration
    *1 Ignition switch assembly

    1. A01VG0I

      Disconnect the connector.

    2. Disengage the 2 claws and remove the ignition or starter switch assembly.

  4. REMOVE STEERING COLUMN COVER (for TMMF Made)

    A01VJ11

    1. Turn the steering wheel to the right and remove the screw indicated in the illustration.

    2. A01VJ38

      Turn the steering wheel to the left and remove the screw indicated in the illustration.

    3. A01VK38

      Remove the screw indicated in the illustration and remove the steering column cover.

  5. REMOVE IGNITION SWITCH ASSEMBLY (for TMMF Made)

    A01VDU9

    1. Disconnect the connector.

    2. Disengage the 2 claws and remove the ignition or starter switch assembly.