GLOW PLUG(w/o DPF) REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. SEPARATE NO. 3 ENGINE COVER BRACKET


    1. A004A2K

      Remove the bolt and separate the No. 3 engine cover bracket.

  5. REMOVE NO. 1 GLOW PLUG CONNECTOR


    1. A004AXE

      Remove the 5 screw grommets.

    2. A004B15

      Remove the nut and disconnect the glow terminal.

    3. Remove the 4 nuts and No. 1 glow plug connector.

  6. REMOVE GLOW PLUG ASSEMBLY


    1. A0048C8

      Using a deep socket wrench 10 mm, remove the 4 glow plugs.

      Note

      Do not remove glow plug assembly, before warm up.