GLOW PLUG(w/ DPF) INSTALLATION

PROCEDURE

1. INSTALL GLOW PLUG ASSEMBLY

   
   

   1. Clean the glow plug assembly installation holes in the cylinder head sub-assembly.

   2. Using a deep socket wrench 10 mm, install the 4 glow plug assemblies to the cylinder head sub-assembly.

      Torque:

      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

2. INSTALL NO. 1 GLOW PLUG CONNECTOR

   
   

   1. Install No. 1 glow plug connector to the with the 4 nuts.

      Torque:

      2.2 N*m  { 22 kgf*cm, 19 in.*lbf }

   2. Install the 4 glow plug screw grommets.

      Tech Tips

      Push the glow plug screw grommet into the threaded portion of the glow plug by hand, and then turn it clockwise.

   3. Engage the clamp to connect the No. 1 glow plug connector to the No.1 vacuum switching valve assembly.

   4. Connect the No. 1 glow plug connector

3. INSTALL NO. 1 ENGINE COVER

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   5.4 N*m  { 55 kgf*cm, 48 in.*lbf }