GLOW PLUG(w/ DPF) REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE NO. 1 GLOW PLUG CONNECTOR


    1. A0047BY

      Disconnect the No. 1 glow plug connector.

    2. Disengage the clamp to separate the No. 1 glow plug connector from the No.1 vacuum switching valve assembly.

    3. A0047ZT

      Remove the 4 glow plug screw grommets.

    4. A004989

      Remove the 4 nuts and No. 1 glow plug connector.

  5. REMOVE GLOW PLUG ASSEMBLY


    1. A0049U0

      Using a deep socket wrench 10 mm, remove the 4 glow plug assemblies from the cylinder head sub-assembly.

      Note

      Do not remove the glow plug assemblies before the engine is warmed up.