IGNITION SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE STEERING COLUMN COVER

    A004ABU

    1. Turn the steering wheel to the right and remove the screw indicated in the illustration.

    2. A004BJ1

      Turn the steering wheel to the left and remove the screw indicated in the illustration.

    3. A00492N

      Remove the screw indicated in the illustration and remove the steering column cover.

  4. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

    A0046YT

    1. Disconnect the connector.

    2. Disengage the 2 claws and remove the ignition or starter switch assembly.