OIL PUMP REMOVAL

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    Click here

  2. INSTALL ENGINE STAND

    Click here

  3. REMOVE ENGINE HANGER

    Click here

  4. REMOVE NO. 1 IGNITION COIL

    Click here

  5. REMOVE VENTILATION HOSE

    Click here

  6. REMOVE NO. 2 VENTILATION HOSE

    Click here

  7. SEPARATE NO. 1 WATER BY-PASS PIPE


    1. A01VI5D

      Remove the bolt.

    2. Disconnect the hose and separate the No. 1 water by-pass pipe.

  8. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

    Click here

  9. REMOVE CAMSHAFT POSITION SENSOR

    Click here

  10. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

    Click here

  11. REMOVE WATER INLET

    Click here

  12. REMOVE CRANKSHAFT POSITION SENSOR

    Click here

  13. REMOVE CRANKSHAFT PULLEY

    Click here

  14. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY


    1. A01VJLS

      Remove the 3 bolts and engine mounting bracket RH.

    2. A01VK20E02
      Text in Illustration
      *1 Seal Washer

      Remove the 24 bolts and seal washer.

    3. A01VJY5E01
      Text in Illustration
      *1 Protective Tape

      Remove the timing chain cover by prying between the timing chain cover and cylinder head or cylinder block with a screwdriver.

      Note

      Be careful not to damage the contact surfaces of the timing chain cover, cylinder block, and cylinder head.

      Tech Tips

      Tape the screwdriver tip before use.

    4. A01VHCH

      Remove the 2 O-rings.

    5. A01VF7H

      Using an 8 mm socket hexagon wrench, remove the plug.

  15. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A01VK79E08
      Text in Illustration
      *1 Protective Tape
      *2 Wooden Block

      Using a screwdriver with its tip wrapped in protective tape, remove the timing chain cover oil seal.