Click here

OIL LEVEL SENSOR INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT ENGINE OIL LEVEL SENSOR (w/ DPF)


    1. Inspect upper level switch resistance.


      1. A01VH90E05

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (E) - 3 (OILH) Level switch on Below 500 mΩ
        Level switch off 1 MΩ or higher
        Table 1. Text in Illustration
        *1 Upper Level Switch - -
        *a Upper side switch off oil level *b Off
        *c On *d

        Component without harness connected

        (Engine Oil Level Sensor)

        If the result is not as specified, replace the engine oil level sensor.

    2. Inspect lower level switch resistance.


      1. A01VK85E04

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 (LVL) - 2 (E) Level switch on Below 500 mΩ
        Level switch off 1 MΩ or higher
        Table 2. Text in Illustration
        *1 Lower Level Switch - -
        *a Lower side switch off oil level *b Off
        *c On *d

        Component without harness connected

        (Engine Oil Level Sensor)

        If the result is not as specified, replace the engine oil level sensor.

  2. Click here

    INSPECT ENGINE OIL LEVEL SENSOR (w/o DPF)


    1. A01VFGRE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (LVL) - 2 (E) Level switch on Below 500 mΩ
      Level switch off 1 MΩ or higher
      Table 3. Text in Illustration
      *1 Level Switch - -
      *a Switch off oil level *b Off
      *c On *d

      Component without harness connected

      (Engine Oil Level Sensor)

      If the result is not as specified, replace the engine oil level sensor.