OIL PRESSURE SWITCH(w/o DPF) INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the oil pressure switch connector.

    2. Start the engine.

    3. A01VGXBE08
      Text in Illustration
      *1 Ohmmeter

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Switch body Idling 10 kΩ or higher
      Engine stopped Below 1 Ω

      If the result is not as specified, replace the oil pressure switch assembly.

    4. Reconnect the oil pressure switch connector.