OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. Click here

   INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   
   1. 

      Apply adhesive to 2 or 3 threads of the oil pressure switch.

      Table 1. Text in Illustration

      *1

      Adhesive

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

   2. Using a 24 mm deep socket wrench, install the engine oil pressure switch.

      15 N*m

      153 kgf*cm

      11 ft.*lbf

      Note:

      Do not start the engine for at least 1 hour after installation.

   3. Connect the engine oil pressure switch connector.

2. Click here

   INSPECT FOR ENGINE OIL LEAK

3. Click here

   INSTALL ENGINE UNDER COVER RH

   Click here