OIL PRESSURE SWITCH INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the engine oil pressure switch connector.

    2. Start the engine.

    3. A01VGXB

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Switch body Idling 10 kΩ or higher
      Engine stopped Below 1 Ω

    4. Reconnect the engine oil pressure switch connector.

      If the result is not as specified, replace the engine oil pressure switch assembly.