THERMOSTAT REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE GENERATOR ASSEMBLY

    Click here

  3. DISCONNECT NO. 1 WATER BY-PASS PIPE


    1. A01VI5D

      Remove the bolt.

    2. Loosen the hose clip and disconnect the No. 1 radiator hose from the water inlet.

  4. DISCONNECT NO. 2 RADIATOR HOSE


    1. A01VJPW

      Loosen the hose clip and disconnect the No. 2 radiator hose from the water inlet.

  5. REMOVE WATER INLET


    1. A01VM5F

      Remove the 3 bolts and the water inlet.

    2. A01VKSHE02
      Text in Illustration
      *1 No. 1 water inlet housing gasket

      Remove the No. 1 water inlet housing gasket.


      1. Remove the No. 1 water housing gasket from the water inlet.

  6. REMOVE THERMOSTAT


    1. A01VM73E01
      Text in Illustration
      *1 Frame

      Remove the frame from the water inlet.

      Tech Tips

      Using needle nose pliers, push down on the frame to compress the spring. While the spring is compressed, turn the frame to remove it from the water inlet.

    2. Remove the spring and element.