STEERING GEAR INSTALLATION

Click here Click here

PROCEDURE

1. Click here

   INSTALL MANUAL STEERING GEAR

   
   

   1. Install the manual steering gear onto the front suspension crossmember with the 2 bolts and 2 nuts.

      79 N*m

      800 kgf*cm

      58 ft.*lbf

      Note:

      Keep the nut from rotating while turning the bolt.

2. Click here

   INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

   
   

   1. Install the No. 1 steering column hole cover sub-assembly to the manual steering gear.

3. Click here

   INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

   (Click here)

4. Click here

   INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

   (Click here)