STEERING WHEEL INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. INSTALL STEERING WHEEL LOWER BOSS COVER


    1. Engage the 4 claws and install the steering wheel lower boss cover.

  2. INSTALL NO. 1 SWITCH WIRE (w/ Shift Paddle Switch)

    Click here

  3. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)

    Click here

  4. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

    Click here

  5. INSTALL STEERING PAD SWITCH ASSEMBLY (w/o Shift Paddle Switch)


    1. Engage the 4 claws and 4 guides and install the steering pad switch assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Engage the clamp to the steering wheel assembly.

  6. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Shift Paddle Switch)


    1. Engage the 4 claws and 4 guides and install the steering pad switch assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Connect the connector to the No. 1 switch wire.

    4. Engage the clamp to the steering wheel assembly.

  7. ADJUST SPIRAL CABLE SUB-ASSEMBLY

    Click here

  8. INSTALL STEERING WHEEL ASSEMBLY


    1. Align the matchmarks and install the steering wheel assembly onto the steering column assembly.

    2. Install the nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    3. Connect all the connectors to the spiral cable.

  9. INSTALL STEERING PAD (for TMC Made)

    Click here

  10. INSTALL STEERING PAD (for TMMF Made)

    Click here

  11. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  13. INSPECT SRS WARNING LIGHT

    Click here