COOLING FAN MOTOR INSTALLATION

PROCEDURE


  1. INSTALL COOLING FAN MOTOR


    1. Install the cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

  2. INSTALL FAN


    1. Install the fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

  3. INSTALL FAN SHROUD


    1. A01VL6I

      Engage the 2 claws and install the fan shroud.

    2. Connect the cooling fan motor connector and engage the wire harness clamp.

  4. CONNECT NO. 3 RADIATOR HOSE

  5. CONNECT RADIATOR RESERVE TANK HOSE

  6. ADD ENGINE COOLANT

    Click here

  7. INSPECT INSPECT FOR COOLANT LEAK

    Click here