PROCEDURE
REMOVE HEADLIGHT ASSEMBLY
REMOVE CENTER ENGINE UNDER COVER
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
Disconnect the connector of the mass air flow meter.
Disengage the 4 clamps and disconnect the wire harness from the air cleaner cap sub-assembly.
Loosen the hose clamp and disconnect the No. 1 air cleaner hose from the air cleaner cap sub-assembly.
Disengage the 2 lock clamps and remove the air cleaner cap sub-assembly from the air cleaner case sub-assembly.
REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.
REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Remove the 3 bolts and the air cleaner case from the air cleaner bracket.
DISCONNECT NO. 3 AIR HOSE
Loosen the hose clamp and disconnect the No. 3 air hose from the intercooler assembly.
DISCONNECT NO. 2 AIR HOSE
Disengage the 2 clamps and disconnect the wire harness.
Loosen the hose clamp and disconnect the No. 2 air hose from the intercooler assembly.
SEPARATE RADIATOR RESERVE TANK ASSEMBLY
Remove the bolt and separate the radiator reserve tank assembly from the radiator support sub-assembly.
SEPARATE HOOD LOCK ASSEMBLY
Disengage the 2 clamps and disconnect the hood lock control cable assembly from the radiator support sub-assembly.
Remove the 3 bolts and separate the hood lock assembly from the radiator support sub-assembly.
REMOVE AIRBAG SENSOR BRACKET
REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Disconnect the connector of the front airbag sensor Click here.
Disengage the 2 clamps and disconnect the wire harness from the radiator support sub-assembly.
Disconnect the connector of the low pitched horn assembly.
Remove the 4 bolts and the upper radiator support sub-assembly.
REMOVE INTERCOOLER ASSEMBLY
Remove the intercooler assembly.
REMOVE RADIATOR SUPPORT CUSHION
Remove the radiator support cushion from the intercooler assembly.
REMOVE GROMMET
Remove the 2 grommets from the intercooler assembly.