PURGE VALVE INSTALLATION

PROCEDURE

1. INSTALL PURGE VALVE (PURGE VSV)

   
   

   1. Install the purge valve (purge VSV) to the intake manifold with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   2. Connect the purge valve (purge VSV) connector.

2. CONNECT NO. 2 FUEL VAPOR FEED HOSE

   
   
   1. 

      *1	Purge Valve (Purge VSV)
      *2	No. 2 Fuel Vapor Feed Hose
      *a	0 to 2 mm (0 to 0.0787 in.)
      *b	Paint Mark
      *c	Rear Side of Vehicle
      *d	Top of Vehicle

      Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).

3. CONNECT NO. 1 FUEL VAPOR FEED HOSE

   
   
   1. 

      *1	Purge Valve (Purge VSV)
      *2	No. 1 Fuel Vapor Feed Hose
      *a	0 to 4 mm (0 to 0.157 in.)
      *b	2 to 7 mm (0.0787 to 0.276 in.)
      *c	140°
      *d	Paint Mark
      *e	Front Side of Vehicle
      *f	Right Side of Vehicle

      Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

4. INSTALL OUTER COWL TOP PANEL

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

5. INSTALL INNER COWL TOP TO COWL BRACE

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

6. INSTALL FRONT NO. 1 VENTILATOR SEAL

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

7. INSTALL FRONT AIR SHUTTER SEAL RH

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK

   Click here