CANISTER COMPONENTS
ILLUSTRATION
| *1 | DECK BOARD ASSEMBLY | *2 | SPARE WHEEL COVER |
| *3 | REAR SEATBACK CENTER HINGE SUB-ASSEMBLY | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | FUEL PUMP GAUGE RETAINER | *2 | FUEL SUCTION TUBE SET GASKET |
| *3 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY | *4 | FUEL TANK MAIN TUBE SUB-ASSEMBLY |
| *5 | NO. 1 CANISTER OUTLET HOSE SUB-ASSEMBLY | *6 | REAR FLOOR SERVICE HOLE COVER |
| *7 | NO. 2 FUEL EMISSION TUBE | *8 | WIRING HARNESS PROTECTOR |
| *9 | BUTYL TAPE | *10 | TUBE JOINT CLIP |
| ● | Non-reusable part |  |
Gasoline |
ILLUSTRATION
| *1 | FUEL PUMP | *2 | FUEL PUMP HARNESS |
| *3 | FUEL SENDER GAUGE ASSEMBLY | *4 | NO. 1 FUEL SUCTION SUPPORT |
| *5 | FUEL PUMP SPACER | *6 | FUEL PUMP FILTER |
| *7 | CANISTER (CHARCOAL CANISTER SUB-ASSEMBLY) | *8 | O-RING |
| |
Gasoline | ● | Non-reusable part |