FUEL PUMP DISASSEMBLY

PROCEDURE

1. Click here

   REMOVE FUEL SENDER GAUGE ASSEMBLY

   Click here

2. Click here

   REMOVE FUEL PUMP

   
   
   1. 

      Disconnect the connector of the fuel pump harness from the fuel suction plate sub-assembly.

   2. 

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and 2 guides, and remove the fuel tube from the No. 1 fuel sub-tank.

   3. 

      Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the No. 1 fuel suction support and fuel pump with fuel filter from the No. 1 fuel sub-tank.

   4. 

      *1	Fuel Filter
      *2	Suction Filter

      Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump from the fuel filter.

      Note:
      

      • Do not damage the suction filter and fuel filter.

      • Do not remove the suction filter from the fuel pump.

   5. 

      Disconnect the connector of the fuel pump harness.

   6. 

      *1	O-ring
      *2	Fuel Pump Spacer
      *a	5.0 mm (0.197 in.)

      Remove the O-ring and fuel pump spacer from the fuel pump.

      Note:

      Be careful not to damage the sealing surface.

      Tip:

      If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm diameter) that is formed as shown in the illustration.