FUEL PUMP ECU INSTALLATION

PROCEDURE


  1. INSTALL FUEL PUMP CONTROL ECU


    1. Install the 2 fuel pump control ECU brackets to the fuel pump control ECU with the 4 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

    2. Install the fuel pump control ECU with fuel pump control ECU brackets to the front side member reinforcement sub-assembly with the 2 bolts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace the fuel pump control ECU.

    3. A004AE1C02
      *a Lock Lever

      Engage the clamp to install the wire harness to the fuel pump control ECU bracket.

    4. Connect the fuel pump control ECU connector as shown in the illustration.

  2. INSTALL COOLING FAN RESISTOR

    Click here