FUEL FILTER INSTALLATION

PROCEDURE


  1. INSTALL FUEL FILTER ASSEMBLY


    1. A01VJKJE01
      Text in Illustration
      *a fuel filter assembly
      *b No. 1 Fuel Filter Protector

      Engage the claw and install the fuel filter assembly to the No. 1 fuel filter protector.

    2. Install the drain screw to the fuel filter assembly.

  2. INSTALL FUEL FILTER ASSEMBLY WITH SUPPORT


    1. A01VHEDE02
      Text in Illustration
      *a Hook
      A01VE7C Insert in a tilting condition

      Install the fuel filter assembly with support with the bolt.

      Note


      • Insert in a tilting condition without interfering with the parts around.

      • Be careful not to damage the connector for water level sensor and ports of fuel filter at installation of and ports of fuel filter at installation of filter assembly. Because the connector is fragile.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the fuel sedimenter connector to the fuel filter assembly.

    3. A01VK8BE01
      Text in Illustration
      *1 Retainer
      *2 O-Ring
      *3

      Fuel Tube

      (fuel filter assembly)
      *4 Fuel Tube Connector
      A01VE7C Push

      Connect the fuel tank to canister tube fuel hose to the fuel filter assembly and lock them by pushing in the retainers.

      Note


      • Match the axis of the connector with axis of the pipe, and push into the connector until retainer makes a click sound.

      • Check that there are no scratches or foreign objects on the connecting part.

      • Check that the fuel tank to canister tube fuel hose is inserted securely.

      • After installing the retainer, check that the fuel tank to canister tube fuel hose is securely connected by pulling on it.

    4. A01VI3JE01
      Text in Illustration
      *a View A
      *b Upper

      Connect the No. 2 fuel pipe sub-assembly to the fuel filter assembly.

    5. A01VG6IE01
      Text in Illustration
      *a View A
      *b Front of Vehicle

      Connect the fuel hose to the fuel filter assembly.

    6. A01VIJBE01
      Text in Illustration
      *a View A
      *b Upper

      Connect the No. 2 fuel hose to the fuel filter assembly.

  3. INSTALL OUTER COWL TOP PANEL (for LHD)

    Click here

  4. INSTALL OUTER COWL TOP PANEL (for RHD)

    Click here

  5. INSTALL INNER COWL TOP TO COWL BRACE (for LHD)

    Click here

  6. INSTALL INNER COWL TOP TO COWL BRACE (for RHD)

    Click here

  7. INSTALL FRONT AIR SHUTTER SEAL RH (for LHD)

    Click here

  8. INSTALL FRONT AIR SHUTTER SEAL RH (for RHD)

    Click here

  9. INSTALL FRONT NO. 1 VENTILATOR SEAL (for LHD)

    Click here

  10. INSTALL FRONT NO. 1 VENTILATOR SEAL (for RHD)

    Click here

  11. INSTALL WINDSHIELD WIPER MOTOR AND LINK

    Click here

  12. BLEED AIR FROM FUEL SYSTEM

    Click here

  13. INSPECT FOR FUEL LEAK

    Click here