FUEL SUPPLY PUMP(w/ DPF) INSPECTION

PROCEDURE


  1. INSPECT INJECTION OR SUPPLY PUMP ASSEMBLY


    1. A01VFCQE06
      Text in Illustration
      *a

      Component without harness connected

      (Injection or Supply Pump Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 2.6 to 3.15 Ω

        If the result is not as specified, replace the injection or supply pump assembly.