REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  2. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. B0046LFN07

      Using SST, hold the crankshaft pulley.

      SST
      09330-00021
    2. B0047Q4

      Remove the 8 bolts and the flywheel sub-assembly.

  3. REMOVE ENGINE REAR OIL SEAL


    1. B0047YAC20
      *a Protective Tape
      *b Cut Position

      Using a knife, cut off the rear engine oil seal lip.

    2. Using a screwdriver with its tip wrapped with protective tape, pry out the rear engine oil seal.

      Note

      After removing, check the crankshaft and cylinder block sub-assembly for damage. If damaged, smooth the surface with 400-grit sandpaper.