FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE ENGINE UNDER COVER RH

    Click here

  3. REMOVE FAN AND GENERATOR V BELT

    Click here

  4. REMOVE CRANKSHAFT PULLEY


    1. B0046YZC01
      *a Hold
      *b Turn

      Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST
      09213-54015
      09330-00021
    2. B00480GC01
      *a Hold
      *b Turn

      Using SST, remove the crankshaft pulley and pulley bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

  5. REMOVE TIMING CHAIN COVER OIL SEAL


    1. Using a knife, cut off the lip of the timing chain cover oil seal.

    2. B0047EFC01
      *a Protective Tape
      *b Cut Position

      Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain cover oil seal.

    3. After removing, check the crankshaft and timing chain cover sub-assembly for damage. If damaged, smooth the surface with 400-grit sandpaper.