FUEL PRESSURE PULSATION DAMPER REMOVAL

CAUTION / NOTICE / HINT

Note

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    A01VGX7

    1. Remove the air cleaner filter element sub-assembly from the cylinder head cover.

  5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. A01VIPBE02
      Text in Illustration
      *1 Clip
      A01VL3H Pull

      Remove the clip.

    2. A01VK7BE03
      Text in Illustration
      *1 Clip
      *2 Fuel Pressure Pulsation Damper
      *3 O-Ring

      Pull the fuel pressure pulsation damper out of the fuel delivery pipe.

    3. Remove the O-ring from the fuel pressure pulsation damper.