CYLINDER HEAD GASKET REMOVAL

PROCEDURE


  1. REMOVE CAMSHAFT

    Click here

  2. REMOVE CYLINDER HEAD SUB-ASSEMBLY


    1. A0048XUE02

      Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head set bolts in the order shown in the illustration.

      Note

      Warpage or cranking of the cylinder head sub-assembly may result from removing the cylinder head set bolts in the incorrect order.

    2. Remove the 10 cylinder head set bolts and 10 cylinder head set plate washers.

      Note

      Be careful not to drop the cylinder head set plate washers into the cylinder head sub-assembly.

      Tech Tips

      Arrange the removed parts in the correct order.

    3. Remove the cylinder head sub-assembly from the cylinder block sub-assembly.

  3. REMOVE CYLINDER HEAD GASKET


    1. A00497G

      Remove the cylinder head gasket from the cylinder block sub-assembly.