REAR CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL ENGINE REAR OIL SEAL


    1. Apply MP grease to a new oil seal lip.

      Note

      Keep the lip free from foreign matter.

    2. A01VL9IE01

      Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

      SST
      09223-15030
      09950-70010   ( 09951-07100 )
      Oil seal tap in depth
      -1.0 to 0 mm (-0.0394 to 0 in.)

      Note


      • Tap the oil seal from the vertical position.

      • Wipe off extra grease from the crankshaft.

  2. INSTALL NO. 1 CRANKSHAFT POSITION SENSOR PLATE

    Click here