ENGINE UNIT(w/o DPF) REPLACEMENT

PROCEDURE

1. REPLACE STUD BOLT

   
   

   1. Using "TORX" socket wrenches E6 and E8, remove the 4 stud bolts.

      

      Text in Illustration

      *a

      Lower Side

      *b

      LH Side

   2. Using "TORX" socket wrenches E6 and E8, install the 4 stud bolts.

      

      Torque:

      Stud bolt A

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Stud bolt B

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Text in Illustration

      *a

      Lower Side

      *b

      LH Side