DRIVE BELT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Use a Toyota genuine belt or an equivalent high strength belt when replacing the belt. If a high strength belt is not used, the durability of the belt may be insufficient. A high strength belt is reinforced with an aramid core and is stronger than the other belts with PET (polyester) or PEN (polyethylene naphthalate) core.

PROCEDURE


  1. INSTALL FAN AND GENERATOR V BELT

    A01VIB0E04
    Text in Illustration
    *A w/o Air Conditioning System *B w/ Air Conditioning System
    *1 Crankshaft *2 V-ribbed Belt Tensioner
    *3 Generator *4 Water Pump
    *5 A/C Compressor - -

    1. Install the fan and generator V belt.

    2. Using SST, turn the V-ribbed belt tensioner counterclockwise and remove the 5 mm bi-hexagon wrench.

      SST
      09216-00041

  2. INSPECT FAN AND GENERATOR V BELT

    Click here

  3. INSTALL NO. 1 ENGINE COVER

    Click here

  4. INSTALL ENGINE UNDER COVER RH

    Torque:
    5.0 N*m  { 51 kgf*cm, 44 in.*lbf }