DRIVE BELT INSTALLATION

PROCEDURE

1. INSTALL FAN AND GENERATOR V BELT

   

   
   

   1. Temporarily install the V belt onto each pulley.

      Text in Illustration

      *A	w/ Air Conditioner
      *B	w/o Air Conditioner
      *1	Crankshaft Pulley
      *2	Generator Pulley
      *3	Water Pump Pulley
      *4	Cooler Compressor Pulley

   2. 

      Turn the bolt C to adjust the tension of the V belt Click here.

   3. Tighten bolt B.

      Torque:

      34 N*m  { 347 kgf*cm, 25 ft.*lbf }

   4. Tighten bolt A.

      Torque:

      54 N*m  { 551 kgf*cm, 40 ft.*lbf }

2. INSPECT FAN AND GENERATOR V BELT

   Click here