Click here

HEATED OXYGEN SENSOR(for Sensor 2) INSPECTION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSPECT HEATED OXYGEN SENSOR (Sensor 2)


    1. Check the resistance.


      1. B0046QCC03
        *a

        Component without harness connected

        (Heated Oxygen Sensor (Sensor 2))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (HT1B) - 2 (DIL+) 20°C (68°F) 11 to 16 Ω
        1 (HT1B) - 4 (E2) Always 10 kΩ or higher

        If the result is not as specified, replace the heated oxygen sensor (sensor 2).