CAMSHAFT OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. for Exhaust Side:


      1. B0046ZGC02
        *A for Exhaust Side

        Disconnect the camshaft timing oil control valve assembly connector.

      2. Remove the bolt, wire harness bracket and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

    2. for Intake Side:


      1. B00483RC02
        *A for Intake Side

        Disconnect the camshaft timing oil control valve assembly connector.

      2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

        Note


        • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

        • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

      3. B0046XSC03
        *1 Camshaft Timing Oil Control Valve O-ring

        Remove the camshaft timing oil control valve O-ring from the camshaft timing oil control valve assembly.

        Tech Tips

        This procedure is performed when the camshaft timing oil control valve O-ring must be replaced with a new one.