CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE CAMSHAFT POSITION SENSOR


    1. B0048AQ

      Disconnect the duty vacuum switching valve connector and 3 engine wire harness clamps.

    2. for Exhaust Side:


      1. B00474S

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note

        If the camshaft position sensor has been struck or dropped, replace it.

    3. for Intake Side:


      1. B0045Z2

        Disconnect the camshaft position sensor connector.

      2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note

        If the camshaft position sensor has been struck or dropped, replace it.