ATMOSPHERIC PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ATMOSPHERIC PRESSURE SENSOR (for LHD)

   
   

   1. Engage the guide and temporarily install the atmospheric pressure sensor to the instrument panel reinforcement assembly with the bolt.

   2. Tighten the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the atmospheric pressure sensor connector.

2. INSTALL ATMOSPHERIC PRESSURE SENSOR (for RHD)

   
   

   1. Engage the guide and temporarily install the atmospheric pressure sensor to the instrument panel reinforcement assembly with the bolt.

   2. Tighten the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the atmospheric pressure sensor connector.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here