ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY

    Click here

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A004BHH

      Disconnect the engine coolant temperature sensor connector.

    2. A0048VNE01

      Using SST, remove the engine coolant temperature sensor and gasket from the cylinder head sub-assembly.

      SST
      09817-33191

      Note

      If a component has been dropped or subjected to a strong impact, replace the engine coolant temperature sensor.