IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE NO. 1 IGNITION COIL


    1. A004A7V

      Disengage the clamp to separate the wire harness from the wiring harness clamp bracket.

    2. Disconnect the 4 No. 1 ignition coil connectors.

    3. A0048WI

      Remove the 4 bolts and 4 No. 1 ignition coils from the cylinder head cover sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace the No. 1 ignition coil.

  3. REMOVE SPARK PLUG


    1. A00481N

      Remove the 4 spark plugs from the cylinder head sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace the spark plug.

      Tech Tips

      Arrange the removed parts in the correct order.