CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE CAMSHAFT POSITION SENSOR


    1. for Exhaust Side:


      1. A0046SQ

        Disconnect the camshaft position sensor connector.

      2. A004AJF

        Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note

        If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.

        Tech Tips

        If the hose clip of the No. 2 ventilation hose is interfering with removal of the bolt, slide the hose clip and perform the work.

    2. for Intake Side:


      1. A004B2X

        Disconnect the camshaft position sensor connector.

      2. A004AP4

        Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

        Note

        If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.