MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tech Tips

   Perform "Inspection After Repair" after replacing the mass air flow meter.

   Click here

   
   

   1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

      Note

      
      

      • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

      • If a component has been dropped or subjected to a strong impact, replace the mass air flow meter sub-assembly.

   2. Connect the mass air flow meter sub-assembly connector.

2. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the mass air flow meter.

      Click here