ACCELERATOR PEDAL ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)

   Note

   
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

   • If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. for CVT and Manual Transaxle with Cruise Control System:

      
      

      1. Install the accelerator pedal sensor assembly with the 3 bolts.

         Torque:

         5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

         Note

         If a component has been dropped or subjected to a strong impact, replace the accelerator pedal sensor assembly.

      2. Connect the accelerator pedal sensor assembly connector.

   2. for Manual Transaxle without Cruise Control System:

      
      

      1. Install the accelerator pedal sensor assembly with the 2 bolts.

         Torque:

         5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

         Note

         If a component has been dropped or subjected to a strong impact, replace the accelerator pedal sensor assembly.

      2. Connect the accelerator pedal sensor assembly connector.

2. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)

   Note

   
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

   • If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace the accelerator pedal sensor assembly.

   2. Connect the accelerator pedal sensor assembly connector.