CAMSHAFT TIMING OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER


    1. A0049JN

      Disengage the 3 grommets to remove the No. 1 engine cover from the cylinder head cover sub-assembly.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A0047OF

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

      • If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE O-RING

    Tech Tips

    This procedure is performed when the camshaft timing oil control valve O-ring must be replaced with a new one.


    1. A00489S

      Remove the camshaft timing oil control valve O-ring from the camshaft timing oil control valve assembly.