VACUUM SENSOR INSTALLATION

PROCEDURE

1. INSTALL VACUUM SENSOR ASSEMBLY

   
   

   1. Install a new grommet to the brake booster assembly.

   2. 

      *A	for LHD
      *B	for RHD
      *a	41°
      *b	40°

      Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.

   3. Connect the vacuum sensor assembly connector.

2. INSTALL OUTER COWL TOP PANEL

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

3. INSTALL INNER COWL TOP TO COWL BRACE

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

4. INSTALL FRONT NO. 1 VENTILATOR SEAL

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

5. INSTALL FRONT AIR SHUTTER SEAL RH

   
   

   • for LHD:

     Click here

   • for RHD:

     Click here

6. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here