ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE BATTERY

    Click here

  3. REMOVE BATTERY TRAY

    Click here

  4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A01VEIZ

      Disconnect the connector of the engine coolant temperature sensor.

    2. A01VHPCE03

      Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

    3. Remove the gasket from the engine coolant temperature sensor.