CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. A01VJZT

      Apply a light coat of engine oil to the O-ring.

      Note

      If reusing the crankshaft position sensor, be sure to inspect the O-ring.

    2. Install the crankshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

    3. Connect the connector of the manifold absolute pressure sensor.

  2. INSPECT FOR ENGINE OIL LEAK


    1. Start the engine and check that there are no oil leaks.

  3. INSTALL ENGINE UNDER COVER RH

    Click here