MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER

   
   

   1. Install the mass air flow meter with the 2 screws.

      Torque:

      1.4 N*m  { 14 kgf*cm, 12 in.*lbf }

      Note

      
      

      • If reusing the mass air flow meter, be sure to inspect the O-ring.

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the mass air flow meter Click here.

   2. Connect the connector of the mass air flow meter.

2. INSTALL NO. 1 ENGINE COVER

   Click here