ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)


    1. A01VLCR

      Remove the accelerator pedal sensor assembly (for CVT, Cruise Control System).


      1. Disconnect the connector of the accelerator pedal sensor assembly.

      2. Remove the 3 bolts and the accelerator pedal sensor assembly.

        Note


        • If a component has been dropped or subjected to a strong impact, replace it.

        • Do not disassemble the accelerator pedal sensor assembly.

        • This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

    2. A01VFY1

      Remove the accelerator pedal sensor assembly (except CVT, Cruise Control System).


      1. Disconnect the connector of the accelerator pedal sensor assembly.

      2. Remove the 2 bolts and the accelerator pedal sensor assembly.

        Note


        • If a component has been dropped or subjected to a strong impact, replace it.

        • Do not disassemble the accelerator pedal sensor assembly.

        • This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)


    1. A01VK3Y

      Disconnect the connector of the accelerator pedal sensor assembly.

    2. Remove the 2 bolts and the accelerator pedal sensor assembly.

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Do not disassemble the accelerator pedal sensor assembly.

      • This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.