ECM INSTALLATION

PROCEDURE

1. INSTALL NO. 2 ECM BRACKET

   
   

   1. Install the No. 2 ECM bracket onto the ECM with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

2. INSTALL NO. 1 ECM BRACKET

   
   

   1. Install the No. 1 ECM bracket onto the ECM with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

3. INSTALL ECM

   
   

   1. Install the ECM with the bolt and nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

   2. Pull down the lever to engage the lock and connect the 2 connectors to the ECM.

      Note

      Make sure that the levers are securely locked.

4. INSTALL INLET NO. 1 AIR CLEANER (for LHD)

   Click here

5. INSTALL NO. 1 ENGINE COVER (for LHD)

   Click here

6. INSTALL BATTERY CARRIER (for RHD)

   Click here

7. INSTALL BATTERY TRAY (for RHD)

   Click here

8. INSTALL BATTERY (for RHD)

   Click here

9. INSTALL OUTER COWL TOP PANEL (for RHD)

   Click here

10. INSTALL INNER COWL TOP TO COWL BRACE (for RHD)

    Click here

11. INSTALL FRONT NO. 1 VENTILATOR SEAL (for RHD)

    Click here

12. INSTALL FRONT AIR SHUTTER SEAL RH (for RHD)

    Click here

13. INSTALL WINDSHIELD WIPER MOTOR AND LINK (for RHD)

    Click here

14. PERFORM INITIALIZATION

    Click here