AIR FUEL RATIO SENSOR(for Sensor 2) INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.


    1. A0049N0E02
      Text in Illustration
      *a SST Fulcrum Length
      *b Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      Specified tightening torque
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace the air fuel ratio sensor.

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench (Seepage Click here).

      • When using SST (fulcrum length of 30 (1.18 in)) + torque wrench (fulcrum length of 300 (11.81 in)): 40 N*m (408 kgf*cm, 30 ft.*lbf).

  2. INSTALL EXHAUST MANIFOLD

    Click here