VACUUM SENSOR INSTALLATION

PROCEDURE

1. INSTALL VACUUM SENSOR ASSEMBLY

   
   

   1. Install a new grommet to the brake booster assembly.

   2. 

      *a	41° +/- 4°

      Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.

   3. Connect the vacuum sensor assembly connector.

2. INSTALL OUTER COWL TOP PANEL

   Click here

3. INSTALL INNER COWL TOP TO COWL BRACE

   Click here

4. INSTALL FRONT NO. 1 VENTILATOR SEAL

   Click here

5. INSTALL FRONT AIR SHUTTER SEAL RH

   Click here

6. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here