MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

   
   

   1. Install the manifold absolute pressure sensor with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

   2. Connect the vacuum hose to the manifold absolute pressure sensor.

   3. Connect the manifold absolute pressure sensor connector.

2. CONNECT ENGINE WIRE

   
   

   1. Connect the engine wire with the bolt.

      Torque:

      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

3. INSTALL NO. 1 ENGINE COVER

   Click here