ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket onto the engine coolant temperature sensor.

   2. Using a 19 mm deep socket wrench, install the engine coolant temperature sensor onto the cylinder head sub-assembly.

      Torque:

      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If a component has been dropped or subjected to a strong impact, replace it.

   3. Connect the connector of the engine coolant temperature sensor.

2. INSTALL BATTERY CARRIER (for LHD)

   Click here

3. INSTALL BATTERY CARRIER (for RHD)

   Click here

4. INSTALL BATTERY TRAY

   Click here

5. INSTALL BATTERY

   Click here

6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

7. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

9. ADD ENGINE COOLANT

   Click here

10. INSPECT FOR ENGINE COOLANT LEAK

    Click here